Dry Buffer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A buffer designed for multi filament systems with mounts for the Prusa i3 Mk3S. There are options to have a spot in…
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 50
- Wydruki
- 0
- Wyświetlenia
- 1486
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial
A buffer designed for multi filament systems with mounts for the Prusa i3 Mk3S.
There are options to have a spot in the bottom for a descant bag, or a shorter version instead.
2 different kinds of supports
Options for all to, and front and rear angled PTFE tube holders (designed to hold m10 holders) I recommend the all top version, as the angled ones are harder to load and have more friction (But they do work).
For the dry version print the Dehumidifier Lower Body and Dehumidifier Base, otherwise the only lower section you need is the standard base.
The Shivs use the standard bearings that come with the MMU2s (Or these I ordered from Amazon - sourcing map 608ZZ Deep Groove Ball Bearing Double Shield 608-2Z 80018 8mm x 22mm x 7mm High Carbon Steel Z1 Bearings).
Here is a link to a video of it being loaded:
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
No
Supports:
No
200
Infill:
15
Filament:
3DQF PLA Black
Category: 3D Printer Accessories