1 / 1
Awesome Filament Spool Rewinder - Upgraded  216.5mm Main Body — zdjęcie 1

Awesome Filament Spool Rewinder - Upgraded 216.5mm Main Body

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is the main body that has been shortened to 216.5mm so will print on the Creality K1

Ocena
0 / 5
Polubienia
14
Pobrania
150
Wydruki
0
Wyświetlenia
1866
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is the main body that has been shortened to 216.5mm so will print on the Creality K1 bed that has a build volume of 220x220mm. I tried 219, 218, 217 mm but all caused negative x movements, so 216.5 is what worked for me. You will find 219 and 218 versions your are welcome to try.

You may want to check your gcode with the following regex for negative x or y values.

Regex: G1.*[XY]-

See my slicer setting in the images. Mainly the support blocks and the minimum support area setting.

The screw holes in the base are the same distance apart in the narrow direction but have been pushed in on the long direction.

Tagi