1 / 1
Guardians of Galaxy vol. 2 - Hueforge
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Guardians of Galaxy vol. 2 - Hueforge
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 282
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Wall-mounted
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Control3d Black
PLA PolyTerra Charcoal Black
PLA+ Sunlu Grey
PLA ESUN PLA LITE Grey
PLA+ Esun Bone White
PLA Control3d White
Swap Instructions:
Start with Black
At layer #14 (1.2mm) swap to Charcoal Black
At layer #21 (1.76mm) swap to Grey
At layer #27 (2.24mm) swap to Grey
At layer #31 (2.56mm) swap to Bone White
At layer #34 (2.8mm) swap to White for the rest.