Universal Spool Centering Cone for Bambu Lab Filament Spool Switcher & Winder

This is a Remix “Spool Brake”  for an amazing project  "Filament Spool Switcher & Winder" Design by @MiklosKiszely_486882

TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING ITEMS FROM THE LINK BELOW 
https://www.printables.com/pl/@Damian27/collections/1304611

Hello Everyone

I printed many spool centering cones, but they all ended up in the trash. Using them, it was difficult to center the spool correctly. Only after a long time did I realize that the problem was that the angle of the cone was too large. Taking a cue from another project, I decided to design the cone with a small angle, which means that centering is now simple and works the first time.

When you complete the project, please share a photo and a comment. Thank you and have a nice day.

IMPORTANT NOTE : 
I recommend printing centering cones from smooth and slippery filaments such as PLA or PETG e.t.c. USING CENTERING CONES MADE OF TPU MAY RESULT IN BAD CENTERING OF THE SPOOL AXIS !!!  TPU, like any type of rubber, is a material with high adhesion and is often used as an anti-slip material. These factors can cause bad positioning of the centering cone when tightening the spool axis.

Information for Spool Centering Cone  :

• Designed specifically for my other project “Winder Spool Holder with Bearings” and "Donor Spool Holder with Bearings"
• Compatible for spools with a hole diameter of 44mm to 57 mm
• Compatible with original spool axes designed by @MiklosKiszely_486882
• I tested spools from companies such as : Bambu Lab, Polymaker, Fiberlogy, Filamentum, FormFutura, Eryone, Spectrum, Rosa, Devil Design

How To Print ? :

• Material : PLA - PETG
• Layer Height : 0.2mm
• Infill : 20% 
• Wall Loops : 4
• Bottom Layers : 4
• Top Layers : 4
• Support : No
• Brim : No

I receive a lot of messages asking what to print for a complete project. It is complicated for many people. I had a problem with that myself. So I decided to prepare a short instruction.

If you take advantage of all my improvements :

All Projects : 
https://www.printables.com/pl/@Damian27/collections/1304611

1. Bambu Lab - Winder Spool Frame 2 - Modular Design
https://www.printables.com/pl/model/769319-bambu-lab-winder-spool-frame-2-modular-design

2. Bambu Lab - Donor Spool Frame 2 - Modular Design
https://www.printables.com/pl/model/766774-bambu-lab-donor-spool-frame-2-modular-design-for-s

3. Bambu Lab - Upgraded All Gears and Axes
https://www.printables.com/pl/model/478967-bambu-lab-filament-spool-winder-upgraded-all-gears

4. Bambu Lab - Upgraded Filament Guide, Filament Guide Sled, Filament Guide Carriage and Knob
https://www.printables.com/pl/model/478923-bambu-lab-filament-spool-winder-upgraded-filament-

5. Bambu Lab - Winder Spool Holder with Bearings - Modular Design 
https://www.printables.com/pl/model/740644-winder-spool-holder-with-bearings-for-bambu-lab-fi

6. Bambu Lab - Donor Spool Holder with Bearings - Modular Design 
https://www.printables.com/pl/model/750033-donor-spool-holder-with-bearings-for-bambu-lab-fil

7. Universal Spool Centering Cone for Bambu Lab Filament Spool Switcher & Winder https://www.printables.com/pl/model/752030-universal-spool-centering-cone-for-bambu-lab-filam

8. Spool Brake for Bambu Lab Filament Spool Switcher & Winder
https://www.printables.com/pl/model/748642-spool-brake-for-bambu-lab-filament-spool-switcher-

9. Handle for Manual Rewind and Adapter for Electric Screwdriver
https://www.printables.com/pl/model/805532-handle-for-manual-rewind-and-hexagonal-adapter-for

10. Stand for Bambu Lab Filament Spool Switcher & Winder
https://www.printables.com/pl/model/479022-stand-for-bambu-lab-filament-spool-switcher-winder

11. Motor Drive 2 - Modular Design for Stand - Auto-Stop Function for Bambu Lab Filament Spool Switcher & Winder
https://www.printables.com/pl/model/485389-motor-drive-for-stand-auto-stop-function-for-bambu