1 / 1
Light Gridfinity Bins Collection
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Collection of Gridfinity Light bins, Width 0.5-6, depth 1-6, height 2-37
- Ocena
- 5 / 5
- Polubienia
- 153
- Pobrania
- 1379
- Wydruki
- 6
- Wyświetlenia
- 3934
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
SzczegółyPliki (999)Wydruki i komentarze (Wydruki: 6) (Komentarze: 9)Remiksy (0)Kolekcje (350)Powiązane
Collection of Gridfinity basic cups with efficient floor. The Efficient floor reduces the plastic used, and print time, however the bin floor is not flat.
Generated using my Gridfinity Extended OpenSCAD script. This will hopefully allow people to grab the size and config you need without needing generate it yourself. The OpenSCAD script is quite flexible and all configurations can't be included here. If what you need is not here please make a suggestion, or check the OpenSCAD script.
Options included:
- Height: [2, 2.5, 3-37] (in 7mm units)
- Widths: [0.5, 1, 2, 3, 4, 5, 6] (in 42mm units)
- Depths: [1, 2, 3, 4, 5, 6] (in 42mm units)
- HalfPitch: off
- EfficientFloor: on
- Attachment points: off
- MagnetDiameter = off
- ScrewDepth = off