1 / 2
2x Long Hose Retainer - 2x Halter für den langen MD-Schlauch (SCUBA diving)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3D print template of an MD long hose holder. 3D-Druckvorlage eines MD-Schlauch-Halters.
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 157
- Wydruki
- 2
- Wyświetlenia
- 998
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (22)Powiązane
These two variants of holders for the long MD hose of a regulator are threaded onto the waist belt of a jacket or harness for diving equipment and hold the long hose of the regulator in place.
Diese zwei Varianten von Haltern für den langen MD-Schlauch eines Lungenautomaten werden auf dem Hüftgurt eines Jackets oder Harness für Tauchgeräte aufgefädelt und halten den langen Schlauch des Lungenautomaten fixiert.