Hyper Tough Replacement Clip (for "Hyper Tough Heavy-Duty Interlocking Organizer")
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replace missing or broken clips, or color-code & better label Hyper Tough bins with 1:1 3D printed replacements.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 67
- Wydruki
- 0
- Wyświetlenia
- 588
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
Replace missing or broken clips, or color-code and better label Hyper Tough bins with 1:1 3D printed replacements. For Hyper-Tough (Walmart brand) Heavy-Duty Interlocking Organizers.
Better Label Surface: I skipped modeling the round bumps on the front face of the original clips to leave a clean flat surface to add labels, since it's really hard to find a good place for outward facing labels on these bins. We used this space to add small icons/photos to represent the contents on one latch & an “address” on the other latch, and color coded the bins with different filament colors.
"No" Supports (built-in snap-off supports): I modeled it with snap-off supports built in, so just print as-is with “No supports” in your print settings. Then use some needle nose pliers to snap off the little C shaped supports after printing.
Material: PETG. I used “Prusament” on an MK4 printer.