Focusrite Scarlett 6i6 desk mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Designed a desk mount for my Focusrite Scarlett 6i6 audio interface. The idea was to move it below the desk, to reduce…
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 171
- Wydruki
- 3
- Wyświetlenia
- 842
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution
Designed a desk mount for my Focusrite Scarlett 6i6 audio interface. The idea was to move it below the desk, to reduce the number of cables running across my desk. This thing comes with 1 model (bracket) that needs to be printed 4 times, once for each corner of the audio interface. The bracket is designed to fit onto the rubber feet of the audio interface, so that the interface can't move in any direction once mounted.
Print Settings
Printer:
Creality CR-6 SE
Rafts:
No
Yes
Resolution:
0.2
100%
Filament: colorFabb PLA Black
Notes:
I printed this on my Creality CR-6 SE using colorFabb black matte PLA. For rigidity, I used 100% infill, though it might work just well with less, but for example 4 walls. Using 4 brackets, there should be little angular force on the parts, so deformation should be okay. If you still fear for that, you could use a different material, e.g. ABS or PETG.
I printed the brackets lying on the side, so the filament runs lengthways and not lateral, for better stability. This required to use supports for the overhanging cutout as well as the screw holes.How I Designed This
I designed this in Fusion 360. After taking the initial measurements of my audio interface, I approached the correct corner radius by doing a few test prints.
Category: DIY