Gridfinity Milwaukee M12 Driver Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
3x5 Gridfinity unit to hold M12 Impact Driver and Drill/Driver.
- Ocena
- 0 / 5
- Polubienia
- 50
- Pobrania
- 176
- Wydruki
- 0
- Wyświetlenia
- 2311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
3x5 Gridfinity unit to hold M12 Impact Driver and Drill/Driver. Required post processing to remove nubs in the slots and widen opening for Impact. I scanned the tools and pulled them into Fusion 360 to create the slots. I was at the end of my abilities in F360 and my computer was also out of power to try to make it better. I will eventually redesign it to make it print work without post processing but this works for now.
Printed in Inland red PLA on Ender 3 S1, 10% gyroid infill. Normal zigzag support, build plate only with 75% angle to support screw/magnet holes. It took 1 day, 3 hours, 13 mins and 284g of filament.
https://www.buymeacoffee.com/bscott