Printacaster for 5 holes bridge (end of 2023 / Europe)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is the core short part for 5 holes bridge. my kit was purchased in november 2023, and came different.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Music
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Printing mishap with Printacaster core short model on Creality K1:
After 18 hours of printing the Printacaster core short model on my Creality K1, I discovered a major issue: the bridge couldn't be installed. The bridge, designed with 5 holes, wouldn't fit into the electronic compartment due to a size mismatch. The compartment's opening was simply too short.
Same for the missing holes and the existing misaligned for that bridge.
Faced with these obstacles, I sought help from a friend. He kindly agreed to modify the original Printacaster model, specifically focusing on adjusting the core short part to ensure compatibility with the bridge, add 2 holes and realigned the 3 others.
