Gravity Broom Holder TPU Ring for Slippery Brooms
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TPU Ring for Gear to help with slick Brooms.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 166
- Wydruki
- 3
- Wyświetlenia
- 732
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
I decided to print a TPU ring for the Gravity Broom Holder because my Broom was slick and it wouldn't catch. The orginal designer mentioned using a rubber band but I thought using TPU may last longer.
I did try printing the gear in just TPU and while it holds the broom good the gear comes out easy because the TPU was compressing. So the Ring was the best solution.
Just stretch the Ring carefully over the gear so it lays in the slot. Then you can catch any brooms in the Gravity Holder.
TPU Ring Size:
Outer Diameter: 19mm
Inner Diameter: 17.5mm
Height: 3mm
You can download the Gravity Broom Holder here:
https://www.printables.com/model/152557-gravity-broom-holder