Underground aquarium bunker/house for fish and shrimp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Orientacyjna cena wydruku pliku
17,55 € – 21,44 € netto (bez VAT)
Dla pliku: Fishhouse.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 19,49 € netto (środek widełek).
- Masa podana przez autora
- 150 g
- Czas druku podany przez autora
- 24 godz.
- Materiał u źródła
- PLA
- Materiał wyceny
- PLA
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Underground aquarium bunker/house for fish and shrimp. Your supposed to place it up against the glass of the aquarium
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 615
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution
Underground aquarium bunker/house for fish and shrimp.
Your supposed to place it up against the glass of the aquarium so that u can see into the bunker.
in the past i made a bunker with a single entrance but the creatures would only rarely enter so i made more entrances.
i recommend slicing the obj file yourself so that the gcode fits your printer. At the moment the gcode is made to fit my own heavily modified printer.
