Rack for Wine Glass Side-by-Side "Double Ds"
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stemware Rack for Wine Glasses which is low-profile, front-loading, side-by-side, one piece holds two glasses
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 85
- Wydruki
- 0
- Wyświetlenia
- 414
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Low, Mid, and High Poly versions in the stl.
I used PLA Prusa Silver Color
For wine glasses with very large diameter base, you may need to scale up slightly… be sure to measure your glasses before print. Drop a cylinder at same diameter into the Prusa file to make sure it fits.
For small/narrower stemware, scaling slightly down will work great. Don't scale in the Z direction, as it may make it difficult to load the glass into the rack.
I prefer it upside down with no supports. I printed both ways.
Feel free to experiment.
