Portafilter Holder for ECM Mechanika
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This holder can be attached to the upper rim of the mug-tray. An ECM portafilter can be stored in the device.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 115
- Wydruki
- 0
- Wyświetlenia
- 544
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
This holder can be attached to the upper rim of the mug-tray of my ECM Mechanika espresso machine. An ECM portafilter can be stored in the device. In the back, there is one recess to add fabric pads for proper alignment and to create a little gap for the heat. The portafilter itself is tucked in with two slots, so it can not fall. The back has air ventilation slots for better drying. The filters hang vertically and can not swing around or damage the machine.
I printed it the way it will be attached, quite a lot of supports are needed, but it works and they are easy to remove. Maybe you come up with a smarter idea; ) Standard Prusa PLA preset worked fine for me with matte black filament.
Enjoy your coffee with cleaner aesthetics :)