Unflippable Small Dog Bowl
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
My elderly dog tends to push his food bowl around and eventually ends up flipping it over onto the floor. This is an…
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 96
- Wydruki
- 0
- Wyświetlenia
- 246
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
My elderly dog tends to push his food bowl around and eventually ends up flipping it over onto the floor. This is an attempt to produce a bowl which he won't dump out. As well, by providing a large surface around the edge for him to place a paw on, he ends up standing on the brim and holding the bowl in place himself.
The bowl is 4" diameter and around 1 1/4" deep. Just about right for a small dog or cat. The outside diameter is ~7 7/8" (200mm) to fit within the bed of most 3D printers.
Print Settings
Printer Brand:
Flsun
Printer:
Flsun Q5
Rafts:
No
Supports:
No
Resolution:
0.20mm
Infill:
15%
Filament: Overture PETG Rock White
Category: Pets