Sky Puck Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall mount for a Sky Stream puck box.
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 351
- Wydruki
- 2
- Wyświetlenia
- 902
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
The Sky Puck Set top box does not come with any way to wall mount it. I wanted a mount that would be easy to clip on and off the wall and give access to the sockets.
This mount flexes at the corners to allow the box to be mounted with two screws to mount to the wall. The corner holders have a lip that holds the box in place, this should be printable without supports as there is an angle on the lip.
The stl is provided but you can use OpenSCAD to adapt for another square box. It could also be easily modified to mount a rectangular box with minimal changes
Category: Organization