1 / 5
Smart Orbiter v3 - Fokoos Odin5 F3 - X Linear Rails — zdjęcie 1
1 / 5

Smart Orbiter v3 - Fokoos Odin5 F3 - X Linear Rails

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hotend/Extruder: Smart Orbiter v3 - Printer:Fokoos Odin5 F3, MGN12H Linear rail - Probe:Beacon - Part cooling:5015fan

Ocena
0 / 5
Polubienia
6
Wydruki
0
Wyświetlenia
741
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables

Smart Orbiter v3 on a Fokoos odin5 F3
requires a top mounted linear rail MGH12H (300mm)

  • Requires heat inserts: M3x4mm long, either 4.6 or 5mm outer diameter
  • Needed screws are mostly M3x6 and M3x8, M3x12 with a couple M3x20
  • MGN12H top mounted
  • X motor cover to install switch type endstop (something like this: Amazon)
  • Beacon probe (standard) (only tested Rev H, but I think Rev D should work too) 
    or Cartographer
  • Probe offset: X 0mm, Y +18mm

No print support needed!! (except for the optional fan noise reducer)

Feb 6, 2023: updated the side brace

Tagi