RIBONE CROSS TWO LAMP SHADE
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Continuation of previous collection RIBONE. This time it is a play with crossing the elements to build a similar volume.
- Ocena
- 0 / 5
- Polubienia
- 13
- Wydruki
- 0
- Wyświetlenia
- 261
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
Design can be printed in any colour or size and has a wide variety of possibilities thanks to additive technologies.
Lamp shades are specially designed to be printed using an FDM 3D printer. While designing these shades I have taken into account the technology and way how the object is printed. Trying to avoid any support material and use as little material as possible to build a firm structure but also big enough in short print time.
Shade is designed to work with IKEA cord set HEMMA:
https://www.ikea.com/gb/en/p/hemma-cord-set-white-10386577/
3D PRINTING SETTINGS
It is easy to print, and it requires no support.
THE BEST SETUP SO FAR IS:
0.3mm layer height
0.55 mm line width
Fancy to print & sell this design commercially? You can subscribe to my commercial catalogue at: https://designs.cubee3d.com/martin-zampach-lampshades