Flexible Hanging Band Strap / Strapping / Band / Mount Hanger
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was looking for some metal/galvanized or copper strapping to hold a new shelf I got tightly to the wall but I must…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I was looking for some metal/galvanized or copper strapping to hold a new shelf I got tightly to the wall but I must have used it all so I decided to whip up Fusion 360 and 3D print my own plastic version of it.
This is a flexible thin strap roughly 200mm x 20mm made with 5mm holes in it to accept all/most common screws or bolts. It is made out of PETG so that it can easily bend/flex and not crack or break. It is quite strong and is great for cable management, hold downs, tie downs, holding shelving or racks, hanging items from your ceiling or walls, and just about anything else you can think of!
Print Settings
Printer Brand:
FlashForge
Printer:
Adventurer 5M Pro
Rafts:
No
Supports:
No
Resolution:
.20 or .30 (Depending on Nozzle size)
Infill:
100%
Filament: Sunlu PETG Black
Notes:
-This should be printed in PETG to make it strong, flexible, and durable with 100% infill!
-I made 3 STL files for this depending on if you want to print 1, 2, or 3 straps at once.-If you want more than 3 then just download the (single) STL file and duplicate as many as you'd like using your slicer software!
-Sized roughly 200x20mm (Fits on a 220x220x220 Build plate!)
Category: Tool Holders & Boxes
