1 / 11
X5SA Pro V6 Titan pancake direct drive dual 5015 — zdjęcie 1
1 / 11

X5SA Pro V6 Titan pancake direct drive dual 5015

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Work in progress!! This is an upgrade from previous design, it features dual 5015 fans and V6-Titan direct extrusion.

Ocena
0 / 5
Polubienia
10
Pobrania
52
Wydruki
0
Wyświetlenia
386
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Share Alike

Work in progress!!

I will post complete instructions and info soon... I hope

This is a major upgrade from my previous design: https://www.thingiverse.com/thing:5438925

It should be compatible with all Pro versions, and might also work with the normal one.

The desing now uses two 5015 sized layer fans, a huge improvement form the original 4010. Also, more things were imrpoved, such as tolerances, space used, cable managment and general sturdiness. The prints themself are probably around 20-30g, making for an aprox. final weight of 350g (I think, will have to check though) with the pancake motor.

You will have to print a Y-endstop extender (file included), because the final print space gets reduced to around 395x385 in the case of the X5SA 400 Pro. To be fair, it was actually impossible to print right on the edge of the bed before, so it's not a big deal.

Category: 3D Printer Extruders

Tagi