MiniDisc Sleeve matching Memorex sleeves for MD
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
MiniDisc sleeve that matches the outside dimensions of the Memorex sleeves and includes a detent mechanism
- Ocena
- 0 / 5
- Polubienia
- 15
- Pobrania
- 112
- Wydruki
- 1
- Wyświetlenia
- 503
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution
While there are some great models already, I couldn't find one that matched the OEM outer dimensions for a sleeve, so I made my own. This one also includes a detent mechanism to hold the disc in the sleeve. I'm not sure how long the mechanism will last, but has the correct amount of holding power when printed on my Prusa. I modeled the sleeve off of a Memorex sleeve that you can see in a couple of the pictures.
The sleeve in the photo was printed vertically, with no supports using clear PLA at .2mm layer and the ‘Quality’ profile.