1 / 3
Mouth kisser (V7) for compound and recurve bow — zdjęcie 1
1 / 3

Mouth kisser (V7) for compound and recurve bow

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Yet another mouth kisser, i wasn't happy with what i saw so i made my own version of this little thing.

Ocena
0 / 5
Polubienia
13
Pobrania
238
Wydruki
0
Wyświetlenia
703
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Sports
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Print settings :

  • TPU 95A
  • 0% infill
  • no supports
  • 2 walls
  • 2 top layers
  • 2 bottom layers.

Don't use “vase”/spiralized mode otherwise the print may fail on top/bottom parts because you'll see a gap in the model and i don't know if it will stay in place if you tie a knot there…

If you don't use TPU, then you're free to do whatever you want ! (but i don't know if it will bend enough to grip your bow string).

Tagi