Mounting Clip for Aqara "Wireless Mini Switch" in Schuko (CEE 7/3) Outlet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A mounting clip for the Aqara "Wireless Mini Switch" smart home device into a 230 V Schuko Outlet
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 44
- Wydruki
- 1
- Wyświetlenia
- 531
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
I needed to fix an Aqara “Wireless Mini Switch” to the wall next to the existing light switch. As we do not need the outlet below the switch and this also was just a temporary solution, I decided to quickly make a mounting clip that would hold the switch in the socket.
The result is a mounting clip which holds the switch with and without the sticky tape combined with a dummy Schuko plug to push it into an outlet. There is a hole in the centre to push the switch out of the clip.
Printing: This model unfortunately needs support. I recommend to print it with the plug part facing downward. “Supports from build plate only” and to set the overhang threshold to 43°. This ensures that support is only created outside the plug as for the interior I designed a 45° slope which should be possible to print unsupported. I printed mine with organic support, but I guess the conventional support will work as well.
As material I suggest using PETG as it ise more elastic than PLA which also is reported to warp over time when under tension…