The 100 0.94in OLED Display Hinge Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds a hinge to "Frame Connector Front 2", and gives you a way to mount the OLED screen to it!
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 230
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
It has a hinge to adjust the angle of the screen, perfect for a printer on the move!
First, attach Holder_Plate to Holder_Plate_Hinge with two M3 screws.
Then, drop the i2c screen onto the tiny pins of the holder plate.
Next, use two more M3 screws to clamp HolderPlate Face over the screen, sandwiching it in place securely
Finally, use another M3 screw as a hinge to attach the whole thing to Frame Connector Front 2.
Install in your printer and voila!
You will need to configure your pi to use the screen. I translated a PDF found on this page from German to English using AI, it may be helpful! Other than that, use the Klipper docs (or ask the Klipper / The 100 Discord servers) to solve any issues you have.