Screw Clips for Govee Lights, Wire Management and LED Strips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Allows you to use screws for permanent installation of many different kinds of lights and wires
- Ocena
- 0 / 5
- Polubienia
- 23
- Pobrania
- 171
- Wydruki
- 0
- Wyświetlenia
- 1324
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
These screw clips have a multitude of uses but I specifically designed them for permanent installation of Govee permanent outdoor lights. The lights come with adhesive pads claiming to be 3M VHB but the adhesive was not strong enough for permanent installation. There are plenty of ready-made injection molded screw clips on the market similar to my design but they are typically made of nylon or other plastics which are not UV resistant and therefore not suitable for outdoor use unless you want to coat them with paint.
I designed these clips for mass production on my printer and continuously optimized the design as I printed hundreds of them. They should require no support material when printed in the default orientation. The default orientation is highly recommended for maximum strength, and it also enables you to print a large number of clips on one plate.
You can use screws up to imperial #8 (4.2 mm). There is some extra room for adjustment so you don't have to be perfect with screw placement. I highly recommend using stainless steel screws for permanent outdoor installation.
Print them with a plastic suitable for UV exposure if installing outdoors. An opaque PETG should be sufficient. I used white PETG which I think will last a very long time but I will update this description if they don't last very long. You can always paint over your clips if you're worried about the plastic being degraded by UV light.
Two technical drawings are provided in the photos to help you select the right screws and determine if these clips will be suitable for other applications. The FreeCAD .FCStd file is also provided if you would like to change the dimensions or design of whatever you want. The step file is also provided if your slicer supports step files for better resolution.
My design is free for individuals to use for their own personal non-commercial usage. If you like my design and find it useful, a contribution made through Ko-fi or PayPal would be greatly appreciated!
Thanks for checking out my design and good luck on your project!
