Variable-angle MK4 xLCD support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Freely rotate your screen up and down on extended arms
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 53
- Wydruki
- 1
- Wyświetlenia
- 465
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- GNU General Public License v2.0
I put my MK4 on a shelf, so high up that the LCD cover obscures the temperature readouts in the footer on the screen. I hacked this remix together in lisscad to solve that problem.
Non-printed parts needed for assembly: 2 × M3 square nuts and 2 × M3x6mm countersunk bolts. (You can use spares from the MK4 kit; the bolt don’t really need to have conical heads.)
Please note that if you angle the screen down, it will go below the level of the printer’s feet. Adjust screw tension to allow you to raise the screen back up as needed for service. Also note that in the raised position, the screen will extend further on the y axis than it would with the original parts.