Copepod HabiPods
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A shelter for copepods in a saltwater reef tank.
- Ocena
- 5 / 5
- Polubienia
- 37
- Pobrania
- 592
- Wydruki
- 1
- Wyświetlenia
- 2120
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is my take on the popular Copepod hideout that hopefully aims to increase printability while maintaining a safe and accessible sanctuary for Copepods when placed in a reef tank.
This is version one, and I recommend increasing perimeters so the bridging has a good anchor and to run it a bit hotter and slower for excellent adhesion to help prevent gaps in the walls. I am planning on making a version 2 with vertical travel tunnels based on feed back from the person I printed this off for. Version 2 will also have larger chamfers on the tunnels to further improve printability. I haven't printed the round version but have looked at the preview in my slicer and it looks fine, maybe a bit more difficult than the square version.
I have done some research and the person I printed this for agreed that Petg seems to be fine for use in saltwater aquariums but I urge you to do your own research into reef forums and make your own determination. I printed using Hatchbox Petg and it has held up well so far.
Recommended Print Settings:
Material: Petg
Perimeters: 3 or more
Top/Bottom Layers: 3 or more