1 / 5
Magnetic Build Plate Guide for an Anycubic i3 Mega
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Build plate guide rails for your i3 Mega
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 74
- Wydruki
- 0
- Wyświetlenia
- 1044
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (16)Powiązane
After years, i upgrade my baseplate to a magnetic PEI plate.
The default build plate is 240x220 but the print area is “only” 210x210 between the clips. So i bought a 220x220 PEI with an magnetic “Sticker”.
For a better alignment help i create a pair of guide rails for my Anycubic i3 Mega.
Unfortunaly the tolerances are very high on the OG Glass and Aluminium plate, it hard to get the perfect snug fit, i used some acrylic double sided tape at the corner (take a look at my pictures) to fix the guides on then plate.