Twisted Torus (soluble supports torture test)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A small torture test for printing with soluble supports. The inside of the torus is hollow, but the holes on the…
- Ocena
- 5 / 5
- Polubienia
- 166
- Pobrania
- 1024
- Wydruki
- 6
- Wyświetlenia
- 4366
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Math
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A small torture test for printing with soluble supports. The inside of the torus is hollow, but the holes on the surface are quite small. This geometry was created to see how well PVA dissolves in hard to reach cavities.
The print in the photo was made using PrimaSelect PVA+, which in general did dissolve, but left some fine strings inside the geometry and especially around the holes.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3 MMU 2
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2mm
Infill:
15%
Filament:
Generic PLA PLA, PVA
Notes:
The supportmaterial should be dissolvable. For a print with PLA chose PVA.