USB Charging Cable Organizer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Organize up to 4 USB cables to reduce clutter
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 30
- Wydruki
- 0
- Wyświetlenia
- 553
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial
Our charging area is cluttered with various USB cables and I made this model to organize and manage the cables. I designed it to fit in most the usual 3d Printer.. and it can handle up to 4 cables. Each cable can be wound up to the designed length and should help manage the clutter!
The print is very simple with no support. I printed in PLA in my tests and it works good,
Print 4 of the inner spinner and push plug (only one of each are provided)
Assembling is easy. The spinner goes inside the insert box and use the push plugs to secure it and the cover goes over the whole thing and cables are routed on both sides