1 / 1
RCBS 10-10 Scale Replacement dust cover
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
RCBS 10-10 Scale Replacement dust cover
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 472
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Got a nice RCBS 10-10 Scale but it was missing the dust cover. This is my attempt at creating a new one.
To make it all rounded like the original, you either need a LOT of supports or it looks horrible like this one:
Added a bevel to the top corner that does not interfere with the packed up scale.
I've included both files for anyone who likes removing supports. When printing on the beveled edge I did need to use a brim and slow the printing speed down to about 50mm/s. It's about 255mm wide so should fit diagonally on most small printers.