8080 Extrududed Aluminum Profile
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This collection includes 8080 extruded aluminum profile, 3 and 4-way joints, and Feet/Caps.
- Ocena
- 0 / 5
- Polubienia
- 43
- Pobrania
- 196
- Wydruki
- 0
- Wyświetlenia
- 1651
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- GNU General Public License v3.0
These are some extruded aluminum profiles I made to match the frame of the Anycubic Kobra 2 Max, but a bit thicker. I made the designs hollow, but with a thick enough perimeter that they are pretty strong as-is.
My intent is to glue the pieces together, then fill the hollow cavity with something like concrete that will give it excellent compressive strength and mass. The concrete filled frame idea is going to be used to build a printer table. I will share the complete table with a how-to guide when it is complete (9+ days left of printing and counting)
Notes :
- You can customize the length of the main 8080 extrusion in your slicer using scaling, also note it has a taper on one end of the extrusion to make it easier to fit into the socket with minimal post-processing
- I recommend printing the extrusion with a large brim and taper side down
- The female sockets have a 0.2mm larger tolerance to help fit the extrusions, even with this tolerance some post-processing may be necessary for low quality prints.