1 / 2
Squidward's House - Dice Tower — zdjęcie 1
1 / 2

Squidward's House - Dice Tower

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

From-scratch remake of @Kickbut101_222314's original dice tower idea

Ocena
0 / 5
Polubienia
22
Pobrania
88
Wydruki
0
Wyświetlenia
479
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution

I really liked @Kickbut101_222314's “Squidward House Dice Tower” but the model had a few defects (like a small hole in the back near the top) and the dice came flying out really fast. I don't have a big gaming table so I wanted the rolled dice to be contained, but I wasn't able to modify the existing model due to issues with the mesh. I decided to create a new one from scratch with a more gentle rolling path, and a walkway/tray for the dice to pop out into. Tested with all types and sizes of dice and works with pretty much anything (unless you have massive dice).

I recommend manually putting the Z seam down the back of the model, as the automatic seam placement usually looks pretty bad. I printed with PLA using 0.2 layer height, 10% infill, and organic supports.

Tagi