1 / 2
Bambu Spool Stay On Filament Clip (AMS compatible)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Design I was pondering for a while, made to be usable with the Bambu AMS.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 153
- Wydruki
- 2
- Wyświetlenia
- 624
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 3)Remiksy (0)Kolekcje (28)Powiązane
I printed at 0.28 layer height without supports or brims on a textured plate.
I did make sure my plate was clean and ready for a print with small contact area.
Not a remix but a F360 design from scratch, after pondering two other designs for a while.
https://www.printables.com/model/739106-tensioned-no-slip-filament-holder
https://www.printables.com/model/656325-no-slip-clip-a-bambu-spool-filament-clip