Ender 3 - X-Axis Pi camera v2 mount + Enclosure, QoL improvements
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Okay guys, I've changed my mind on this design. It's a bad one for the v2 camera. Don't use it lol.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 13
- Wydruki
- 0
- Wyświetlenia
- 168
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Okay guys, I've changed my mind on this design. It's a bad one for the v2 camera. The way that the camera housing is designed requires you to squish your camera sensor to get it in the case. It's a bad design and it's caused me to ruin 2 v2 cameras. A much better suggestion is to:
Use the two designs below instead. For the sake of your camera.
original design text follows -
https://www.thingiverse.com/thing:2987719 https://www.thingiverse.com/thing:4244869
remixed from https://thingiverse.com/thing:3147295
I had some issues with the original v2 camera parts, so I made some QoL improvements. I just did this in meshmixer, so if you have any suggestions to improve the design, please feel free to let me know.
Improvements compared to the original v2 parts:
- front face minor change, removed slot so camera can slide in easier
- back face fitment improved
- mount camera cable slot widened 2mm in order to accomodate ribbon cable better.
- mount edited to include a slot for easier installation in case you had issues with the original.
Category: 3D Printer Accessories