AirTag Holder - Magnetic and Parametric
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An AirTag holder which can easily be reconfigured for different magent sizes.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 465
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Public Domain
A magnetic mount for the Apple AirTag. The design is a two parter, a four magent base and a cap to hold the AirTag. The design isn't supposed to be waterproof but will likely protect the AirTag from incidental spashing and slight exposure to water.
The Fusion 360 file is included, you can change the user parameters (height and diameter) and bang! It will redraw to whatever size cylindrical magnet that you have lying around.
The .3MF file included here is setup for 10mm diameter (1.6mm height) cylindical magnets. Max magent size would be around 5mm in height and 16mm in diameter.
Much thanks to danilab.xyz for providing a proper Fusion model of the AirTag itself, which I built this model around.
Notes on printing: I printed a version in PLA and in PETG. There is already some clearance between the threads built into the model but I'd recomend a small layer height in order to ensure you don't run into overhang issues on the threads - .15mm layer height worked well on MK3S
License: I release all my designs under Creative Commons Public Domain but see the Printables page for danilab.xyz's AirTag model itself, which is included in the Fusion model I've provided for this design.