9mm Dummy Round with flex pad for training that stays in the barrel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This dummy round is modified so that it will not be ejected by the extractor when inserted into the chamber.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 81
- Wydruki
- 0
- Wyświetlenia
- 810
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As stated in the file name - this dummy is modified so that it will not be ejected by the extractor when inserted into the chamber. This makes it possible to manipulate the slide and practice triggering without having to search the ground every now and then for practice rounds while the firing pin is still protected.
I was inspired by a similar dummy I saw on another person at the range. However, I couldn't track down the seller/manufacturer, so I decided to make my own.
The dummy consists of two parts - the main body of the round and a flexible replacement for the cartridge primer. These two parts have to be glued together with superglue. Next, the R-03 o-ring must be inserted into the slot in the dummy (good to have few spares o-ring since they sometimes brake during the insertion).
Removal from chamber - it can be easily pushed out from muzzle side for example by wooden pencil :-)
I printed the main body from PLA and the pad from FLEX.