Onewheel safety wheels (fangs) compatibility remix
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a homemade "fangs" type of modification for the Onewheel
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 95
- Wydruki
- 0
- Wyświetlenia
- 962
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This is a homemade "fangs" type of modification for the Onewheel. In case of a nosedive, these wheels installed in the front of the board can give you a chance to react and recover instead of face planting into the asphalt.
The original file had some pretty tight tolerances, so I just opened up the area where the wheel fits in. Also for some reason original remixer forgot to include both left and right versions of the file, so I've included both.
I had bought slightly different 40mm wheels than the original creator, they had trouble fitting. This design should make it easier to put together without worrying about sanding or filing to get enough room for the wheel to spin freely.
https://www.amazon.com/gp/product/B07H9ZG825/ref=ppx\_yo\_dt\_b\_asin\_title\_o07\_s00?ie=UTF8&psc=1
Printed in NylonX carbon fiber nylon. Use other materials at your own risk. I would recommend you buy real Fangs instead of printing in a material like PLA.