Center Punch Jig for Ender3dent Bed Plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Just a jig to help locate some holes
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 45
- Wydruki
- 0
- Wyświetlenia
- 391
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- Creative Commons — Attribution
Arguably the best way to attach an Ender 3 pro bed to a Voron Trident frame requires you to drill 2 holes through the ender bed plate. I didn't completely trust my own ability to locate the holes on the center line of the plate so I mad this Jig.
The two locating holes are 2mm and are just there to locate a center punch without any fuss. I would not recommend trying to use this in place while drilling the holes. The two locating posts are sized to fit in the wholes in the plate where the screws for the pom wheels were. One is larger than the other so if you find the posts aren't lining up just flip the bed plate and that should work.
Any print settings should work for this, I printed mine with 4 walls 5 top and bottom and 40% infill out of ABS and it took about 11 minutes on my Ender 3 pro. There's not reason to use these settings just Yolo it and you should be fine.