Voxelab Aquila, PINDA, EBB42 Mount for BMG + V6 Extruder Fan Shroud
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed BMG + V6 Extruder mods to use a Voxelab Aquila, M8 Trianglelab PINDA, and/or EBB42 canbus.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 411
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a great fan shroud that allows the use of a BMG extruder + V6 together with no gap and very little tubing. As the gantry on an Aquila varies slightly from Ender, some modifications were needed to be able to mount it.
Below you'll find a couple of mods for this BMG + V6 Extruder by TwoPuncakes.
Includes:
- Modified normal backplate + front plate for the Voxelab Aquila (original - can't confirm fitting on other versions).
- Modified backplate for Voxelab Aquila use with the EBB42 CAN bus. *Use same modified front plate
- Side bracket for the use of a TriangleLab P.I.N.D.A. or other M8 inductive probe: https://www.aliexpress.us/item/32967045729.html
The above parts are designed around a normal-facing BMG extruder. You'll find the rest of the parts needed (for the side fans) on the original post this was remixed from. Specifically, I ended up using the following:
RH Right Duct
RH Right Fan Mount
RH Left Duct
RH Left Fan Mount