1 / 5
120mm to 60mm fan adapter for M3 bolts.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple fan adapter with M3 holes. 56mm of height.
- Ocena
- 5 / 5
- Polubienia
- 25
- Pobrania
- 249
- Wydruki
- 2
- Wyświetlenia
- 863
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (1)Wydruki i komentarze (Wydruki: 2) (Komentarze: 2)Remiksy (0)Kolekcje (32)Powiązane
Simple fan adapter with M3 holes. 56mm of height. The inside hole of the 60mm fan side has 7mm of diameter to accommodate the bolt head. Every hole has 3mm of thickness.
For water cooling radiators or similar.
For the fan attachment, use M3 countersunk bolts leaving the countersunk head at the fan side to hold the fan centered.
Does not require supports to be printed as long as the 120mm side is kept facing the printer bed.