Everdell Insert with room for expansions
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Everdell Insert that will allow you to store your Everdell base game and *expansions together!
- Ocena
- 0 / 5
- Polubienia
- 38
- Pobrania
- 237
- Wydruki
- 0
- Wyświetlenia
- 3311
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Public Domain
I have taken the foam version of the insert from Folded Space and recreated it to be printed on the Elegoo Neptune 3.
*It fits all of the expansions except for two exceptions. New Leaf and Mistwood were not originally included in the Folded Space organizer so I will be working on releasing completely original components that should fit in the box with the current set.
Personally, I have loved this setup for Everdell, I just hated how Janky the foam was when you pulled it out of the boxes so this was a great project to get things the way I liked them without worrying about starting from scratch.
There are two options that you could print with.
Original Print Settings
Layer Height: .2
Top/Bottom Layer: 3
Infill: 10-15%
No Supports or Brims Needed
Lighter/Less Filament Settings
Layer Height: .2
Top/Bottom Layer: 0
Infill: 15% is suggested for the smaller elements! The wood, berries, pearls, and stone will fall through anything less than 15% from experience.
It is suggested that you store your playing boards in one of the expansion boxes as they will not fit with this insert in the box.