DIY ballistic chronograph (smaller and simpler box)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Thanks to foam.blasted for the nice design. This box is basically a simpler box with less height than the original.
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 63
- Wydruki
- 4
- Wyświetlenia
- 845
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
As I used an Arduino Nano instead of the Uno I did not see the necessity for such a large box and decided to lower the overall profile. For a cleaner print I also removed all the engraved letters.
USB-C connector used for voltage supply:
https://www.amazon.de/gp/product/B0CDBZZQBZ
I also decided to rewrite the firmware for the device which now uses interrupts, provides more data on the display and supports a reset of the values by blocking both sensors for a short time.
https://github.com/pumikachu/dart-chrono