1 / 2
Inland Filament clip — zdjęcie 1
1 / 2

Inland Filament clip

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

filament clip for inland filament (https://www.microcenter.com)

Ocena
0 / 5
Polubienia
14
Pobrania
138
Wydruki
0
Wyświetlenia
709
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

Since I primarily use Micro center “Inland” filament, these clips fit the two types I've run across with PETG and PLA filament. The OpenSCAD file is attached so you can easily modfy for other filament.  If you don't know how let me know and I'll add another if you provide the required dimensions:

//          <----------> W
//             <--->     LW
//                <->     SW
//          ___________
//          |  _____      |             ----
//          |  |        |   | 
//          |  |        |   |             (LH)
//          |  |_       }  |  <--  FD 
//          |____|    |__|             ----

//clip defines
THK = 1.5; //clip thickness
D = 7.5; //depth of clip
FD = 1.75; //filament diameter

//Inland type 1: LH = 4.8, LW=3.5, SW=2.5
//Inland type 2: LH = 8.4, LW=4.8, SW=2.5
LH = 4.8; //Lip Height, 4.6 as measured
LW = 3.5; //spool width including lip
SW = 2.5; //spool width without lip

Tagi