Holder for tables at building G at TUL (Technical University of Liberec)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I designed holder for folding tables at university TUL (building G). This helped me to have a notebook in lecture (to…
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 32
- Wydruki
- 3
- Wyświetlenia
- 138
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed holder for folding tables at University TUL (building G). This helped me to have a notebook in lecture (to take notes obviously ;) ) and didn't need to worry about the table folding and my notebook crashing to the ground.
You can use only one, but if you want to be safe, just use 2.
Tested with 30% infill and 50% infill.
30% was good but 50% was a bit stiffer and felt a lot safer.
This model is not final, so use it at your own risk.
Print Settings
Printer Brand:
Creality
Printer:
Ender-3 V2 Neo
Rafts:
Doesn't Matter
Supports:
No
Infill:
50 - gyroid
Filament:
NEBULA PETGCategory: Gadgets