SPConnect Adapter for BMW Connected Ride Cradle
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This adapter allows you to use a SPConnect Anti-Vibration-Module with your BMW Connected Ride Cradle.
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 253
- Wydruki
- 1
- Wyświetlenia
- 2072
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This adapter allows you to use a SPConnect or SPConnect+ Anti-Vibration-Module with your BMW Connected Ride Cradle.
We all know the truth… Smartphones get bigger and bigger, and eventually they won't fit in our beloved mounts anymore. ;-) Especially the more and more protuding camera lenses make it hard to fit any new phone into the BMW cradle. Because I did not want to lose the great bluetooth functionality of the cradle, giving me access to my motorcycle's stats and BMW's very decent navigation, I designed this adapter.
You will need:
- SPConnect Anti-Vibration Module (SPC or SPC+, both should work)
- M4 x 16 mm bolt and nut
- 25 or 26 mm washer
- optional: a small securing washer
Printing instructions:
Do not use PLA! Use ABS or at least PETG. PLA is too brittle and will get soft when it gets warm. You don't want your precious smartphone fall from your motorcycle while going 100 mph or more…!
Print the model in its provided orientation. With a 0.4 mm nozzle, use 0.2 mm layer height and 3 wall loops for strength. Use 50 % infill, at least for the area around the SPConnect mount for stability. I set the general infill to 25 % and used a modifier around the mounting area. And don't forget to enable support for the mounting hole where the washer goes.
I decided to put the R1200 GS logo on my personal version, which I also provide here. Feel free to enhance this model as you like. :-)
Happy printing… and always drive safely!