Pneumatic connectors/fittings clips
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Pneumatic connectors/fittings clips for Ender3 extruder (PC4-M10, KJH04-M6 and PC4-M6)
- Ocena
- 5 / 5
- Polubienia
- 17
- Pobrania
- 200
- Wydruki
- 3
- Wyświetlenia
- 631
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Pneumatic connectors/fittings clips
These pneumatic connectors/fittings clips are designed for use with the Ender3 extruder (PC4-M10, KJH04-M6 and PC4-M6). The design is parametric, allowing the clip to be adjusted to fit various pneumatic connectors. The OpenSCAD file is attached, and you can use your measurements as input.
Dimensions and measurements
Not all pneumatic connectors/fittings share the same dimensions. Check the internal diameter (in_dia) and thickness. When using the rounded_clip() module, ensure that that the round_by is more than two times smaller than the thickness (2*round_by < thickness) or the part won't render.
If the part breaks, try increasing out_dia and opening.
Note
The rounded_clip() module utilizes the Minkowski sum transformation, and the preview rendering is slow. It's recommended to use clip() for testing and then switch to rounded_clip() before exporting to STL.
Material
Use PETG or ABS. Avoid PLA, as it may break.
Slicing
Choose a layer height so that the sum of all layers equals the thickness of the clip. I've used a 0.2mm layer height for all layers to match 1.4mm and 1.8mm thickness. Thicker layer prints are stronger and less likely to break.