Prusa XL reverse engineered (silhouette only)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is a model of the Prusa XL which is as accurate as possible to the original.
- Ocena
- 5 / 5
- Polubienia
- 45
- Pobrania
- 242
- Wydruki
- 1
- Wyświetlenia
- 625
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This 3D-Model is as close as possible which I got down to with my callipers. I hate inaccurate measurements, so here was no guessing or big round up involved.
Warning: Have in mind that the XL you will receive might have some changes to it caused by development and so on. This Model is the based on a version delivered in 08/2023 (Antenna in the rear middle and rear cover with hexagon cutouts).
The printed parts included are from the official Prusa XL source (Downloaded on 22.10.2023):
https://www.printables.com/de/model/449554-xl-printable-parts
Enjoy modeling whatever your heart desires for the XL or further complete this model 🙃
If you find any major issues please comment in the "Makes & Comments" section!