Bowden Tubing Mount for Creality Filament Sensor
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added a housing to my filament sensor to allow for the use of a bowden tube to relocate my spool for my CR-10 SE.
- Ocena
- 4 / 5
- Polubienia
- 13
- Pobrania
- 88
- Wydruki
- 2
- Wyświetlenia
- 680
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
The idea was to relocate my spool and use bowden tubing to get the filament to the sensor. I made two types a back mounted (shown in green) in case you did not want to use the pivot that comes with the CR-10SE. I made a front mount (shown in red) that screws into the pivot mount on top of the CR-10SE. Added the Fusion file to help with your changes/remakes.
Designed to use the PC4-M5 quick fittings. Amazon Link
The back mount can reuse the screws that came with the CR-10SE. The front mount requires the use of longer screws to reach the pivot mount. The are countersunk M3. I found some 30mm that work great, but are a little long.
*****Warning: I am not 100% thrilled with this design. Filament binds on occasion going into sensor. Working out kinks…if anyone has a suggestion would love a comment or two.