Fixation template and brackets for ex2200-12C
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Fixation template and brackets for mounting an ex2200-12C under a table or on a wall using tapered screws.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 218
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution
This is a small 2 part model to mount an Juniper ex2200-12C under a desk. This model utilizes screws to fixate the switch. The triangle part is just for easier mounting as the screws are already spaced correctly. As this is an under table mount there are also side brackets to prevent the switch from sliding out of the screws holding it on the table.
I used 3.5mm screws to fixate the switch. As they were a bit longer this model introduces a bit of spacing between the table and the switch with the site benefit of better air circulation, though the later shouldn't be needed.
Installation instructions
Hold the template to the correct location. Pick one hole to pre-drill the hole. Srew in one countersunk screw. Validate the back plane still aligns and pre-drill the next hole. Screw in one screw and continue.
You can vary the above process to meet your tools. But with a manual drill this worked best for me.
Now you can mount the side brackets to the switch and slide it into the screws. Mark the location of the hole/predrill directly. Add screws accordingly.
Now the switch should be well mounted.